Wedge clamp serrated QT steel black hardened 04524-2212
- Suitable for series clamping
- For high clamping forces
- Can be used both in a tapped hole and in a T-slot
- Tolerance compensation possible with elongated hole
Unità di vendita
240,87 CHF
Aggiunto al carrello
Denominazione
Morsetto a v
Versione 1
zigrinato
Versione 2
doppio
Materiale
Corpo base
acciaio da bonifica
Superficie
corpo base
temprato
Colore
Corpo base
nero
B=Larghezza
48
D=Filettatura
M12X40
A
max.
49,5
A
min.
44
Applicazione
parti grezze
C
22
Coppia
di serraggio
max. Nm
85
E
3,5
Forza di serraggio
max. kN
30
Sistema di fissaggio
filettatura
~ CONFLICT MINERALS 3TG status
not yet identified
~ CP65 substance 2 cancer
soots, tars, and mineral oils
~ PFAS free?
not yet identified
~ REACH SVHC-free?
yes
~ RoHS conformity
yes, without exemption
~ TSCA 6(H) conformity
yes
Descrizione
Material
Wedge and jaw segments carbon steel.
Version
Wedge and jaw segments hardened, black.
Note
The functioning principle make the wedge clamps ideal for series clamping. The wedge form can exert high clamping forces.
These wedge clamps can be mounted in grid holes or T-slots. Tightening the socket screw moves the wedge down and the jaws out pressing the workpieces against the fixtures fixed stops.
The wedge has a slightly elongated hole allowing for movement to compensate for tolerances.
Spread width:
M8 = ±0.5 mm
M10 = ±1.0 mm
M12 = ±1.0 mm
M16 = ±1.5 mm
These wedge clamps can be mounted in grid holes or T-slots. Tightening the socket screw moves the wedge down and the jaws out pressing the workpieces against the fixtures fixed stops.
The wedge has a slightly elongated hole allowing for movement to compensate for tolerances.
Spread width:
M8 = ±0.5 mm
M10 = ±1.0 mm
M12 = ±1.0 mm
M16 = ±1.5 mm
Drawing reference
D) DIN 6912 cap screw
1) Jaw face smooth
2) Jaw face serrated
3) Wedge clamps
4) Workpiece
5) Fixed stop
1) Jaw face smooth
2) Jaw face serrated
3) Wedge clamps
4) Workpiece
5) Fixed stop
Nota importante sul download dei modelli CAD
Per poter scaricare i nostri modelli CAD, occorre effettuare il login. Se non è stato ancora creato un account, si prega di registrarsi alla voce "Il mio account" (lato destro dello schermo) e di seguire le istruzioni.
D'autres clients ont également acheté
