Guida telescopica Over extension acciaio inox grezzo 21334-95-0406
- Latches in open position
- Quick frontal release
- Suitable for flat mounting
Unità di vendita
149,90 CHF / pz.
Aggiunto al carrello
Denominazione
Guida telescopica
Versione 1
Estensione maggiorata
Tipo di prodotto
standard
Materiale
Corpo base
acciaio inox
Superficie
corpo base
grezzo
B=Larghezza
12,7
H=Altezza
51,6
L=Lunghezza
406
A
15,9
A1
123,8
A4
311,2
A5
336,6
A6
362
A7
349,3
A8
336,6
Capacità di carico
per coppia
kg
80
Codice articolo
del produttore
DS3557-0016
Corsa
S
432
Montaggio
montaggio laterale
Tipo di imballaggio
1 pezzo = 1 coppia
~ CONFLICT MINERALS 3TG status
no intentional 3TG
~ CP65 substance 2 cancer
nickel (metallic)
~ PFAS free?
yes
~ REACH SVHC-free?
yes
~ RoHS conformity
yes, without exemption
~ TSCA 6(H) conformity
yes
Descrizione
Material
Slides stainless steel 1.4301.
Ball cage stainless steel 1.4301.
Balls stainless steel 1.4034.
Version
Slides bright.
Ball cages bright.
Balls bright.
Ball cages bright.
Balls bright.
Note for ordering
Sold in pairs.
Note
On telescopic slides with over-extension, the travel is greater than the installed length. Latches in open position. When the release lever is actuated, the drawer can be taken out easily and separated from the guide.
The dynamic load capacity of the telescopic slides indicates the maximum load rating of a vertically mounted slide pair when the entire extension length is used. The load capacity specified is calculated with a slide spacing of 400 mm and is based on the maximum value with 10,000 cycles.
The load capacity is ca. 75% lower by horizontal mounting.
The head height of the fastening screws should not exceed 2.5 mm otherwise there is a risk of collision with other parts of the slide.
The dynamic load capacity of the telescopic slides indicates the maximum load rating of a vertically mounted slide pair when the entire extension length is used. The load capacity specified is calculated with a slide spacing of 400 mm and is based on the maximum value with 10,000 cycles.
The load capacity is ca. 75% lower by horizontal mounting.
The head height of the fastening screws should not exceed 2.5 mm otherwise there is a risk of collision with other parts of the slide.
Advantages
Latches in open position
Quick frontal release
Quick frontal release
Drawing reference
1) Mounting hole by 21334-95-0305 not provided
Nota importante sul download dei modelli CAD
Per poter scaricare i nostri modelli CAD, occorre effettuare il login. Se non è stato ancora creato un account, si prega di registrarsi alla voce "Il mio account" (lato destro dello schermo) e di seguire le istruzioni.
Other customers also bought
