Metal bellows coupling with radial clamping hub stainless steel 23001-01-0300651919
- Play-free metal bellows coupling with clamping hubs
- For shaft diameters from 10 to 70 mm
- Torque range: 18 - 500 Nm
- Lowest moment of inertia
- Ideal for servo motors and machine tools
Unité de vente
CHF356.62
hors TVA
Ajouté à votre panier
Denominazione
Giunto a soffietto metallico
Versione 1
con mozzo di serraggio radiale
Materiale
Corpo base
acciaio inox
Materiale
Componente
acciaio inox
L=Lunghezza
65
A
20
C
(ISO 4029)
M6
Coppia di
serraggio delle
viti Nm
15
Coppia nominale
Nm
30
D1
(H7)
19
D1/D2
max.
con cava per linguetta
30
D1/D2
max.
32
D1/D2
min.
10
D2
(H7)
19
D4
56
Dimensioni
30
Disallineamento assiale massimo
(mm)
0,6
Disallineamento radiale massimo
(mm)
0,15
L2
7,5
L3
24,5
Momento di inerzia
(gm²)
0,41
R
56,4
Rigidità della molla
radiale
(N/mm)
720
Rigidità della molla
assiale
(N/mm)
50
Rigidità torsionale
(10³ Nm/rad)
38
Velocità
max.
1/min
10300
offset angolare
massimo
(°)
1,5
~ CONFLICT MINERALS 3TG status
no intentional 3TG
~ CP65 substance 2 cancer
nickel (metallic)
~ PFAS free?
not yet identified
~ REACH SVHC-free?
yes
~ RoHS conformity
yes, without exemption
~ TSCA 6(H) conformity
yes
Description
Material
Hub stainless steel.
Bellows stainless steel.
Bellows stainless steel.
Version
Bright.
Note
Metal bellows coupling with high torsional rigidity. The metal bellows compensates for axial, radial and angular shaft misalignment with low restoring forces. With clamping hubs for fastening to shafts.
They are primarily used when precise position and motion transmission is required, e.g. servo motors in machine tools, packaging machines, woodworking machines and in automation technology.
They are primarily used when precise position and motion transmission is required, e.g. servo motors in machine tools, packaging machines, woodworking machines and in automation technology.
Temperature range
-30 °C to +120 °C.
Assembly
The metal bellows coupling hubs have an H7 tolerance. The recommended clearance tolerance is 0.02 - 0.05 mm. This tolerance and lubricating the shaft journals aid assembly and removal.
The metal bellows may be deformed max. 3 times over the permissible deflection values specified in the catalogue during assembly and removal. Avoid any use of force.
The metal bellows may be deformed max. 3 times over the permissible deflection values specified in the catalogue during assembly and removal. Avoid any use of force.
On request
Desired hub holes D1 and D2 separately with tolerance class or tolerance zone.
Keyway acc. to DIN 6885. Please observe largest possible bore by keyway.
Keyway acc. to DIN 6885. Please observe largest possible bore by keyway.
Remarque importante concernant le téléchargement des modèles CAO
Pour pouvoir télécharger nos modèles CAO, vous devez d’abord connecter. Si vous n’avez pas encore créé de compte, inscrivez-vous en cliquant sur « Mon compte » (à droite de l’écran) et suivez les instructions.
D'autres clients ont également acheté
