Metal bellows coupling with detachable clamp hubs aluminium 23001-05-0180631212
- Play-free metal bellows coupling with removeable clamping hubs
- For shaft diameters from 10 to 70 mm
- Torque range: 18 - 500 Nm
- Lowest moment of inertia
- Ideal for servo motors and machine tools
Unité de vente
132,09 CHF
hors TVA
Ajouté à votre panier
Désignation
Accouplement à soufflet metallique
Modèle 1
à moyeux de serrage démontable
Matériau
du corps de base
aluminium
Matériau
des composants
acier inoxydable
L=Longueur
63
A
17
C
(ISO 4029)
M5
Couple de
serrage des
vis en Nm
8
Couple d’inertie
(gm²)
0,04
Couple nominal
en Nm
18
D1
(H7)
12
D1/D2
max.
avec rainure de clavette
25,4
D1/D2
min.
10
D1/D2
max.
25,4
D2
(H7)
12
D4
45
L1
37
L2
5,5
L3
19,5
R
47,4
Rigidité du ressort
axiale
(N/mm)
50
Rigidité du ressort
radiale
(N/mm)
205
Rigidité à la torsion
(103 Nm/rad)
20
Taille
18
désalignement angulaire
max.
(°)
1,5
désalignement axial max.
de l’arbre
(mm)
0,5
désalignement radial max.
de l’arbre
(mm)
0,2
vitesse de rotation
max.
1/min
12800
~ CONFLICT MINERALS 3TG status
no intentional 3TG
~ CP65 substance 2 cancer
nickel (metallic)
~ PFAS free?
not yet identified
~ REACH SVHC-free?
yes
~ RoHS conformity
yes, without exemption
~ TSCA 6(H) conformity
yes
Description
Material
Hub aluminium.
Bellows stainless steel.
Bellows stainless steel.
Version
Bright.
Note
Metal bellows coupling with high torsional rigidity. The metal bellows compensates for axial, radial and angular shaft misalignment with low restoring forces. With clamping hubs for fastening to shafts.
They are primarily used when precise position and motion transmission is required, e.g. servo motors in machine tools, packaging machines, woodworking machines and in automation technology.
They are primarily used when precise position and motion transmission is required, e.g. servo motors in machine tools, packaging machines, woodworking machines and in automation technology.
Temperature range
-30 °C to +120 °C.
Assembly
The metal bellows coupling hubs have an H7 tolerance. The recommended clearance tolerance is 0.02 - 0.05 mm. This tolerance and lubricating the shaft journals aid assembly and removal.
The metal bellows may be deformed max. 3 times over the permissible deflection values specified in the catalogue during assembly and removal. Avoid any use of force.
The metal bellows may be deformed max. 3 times over the permissible deflection values specified in the catalogue during assembly and removal. Avoid any use of force.
On request
Desired hub holes D1 and D2 separately with tolerance class or tolerance zone.
Keyway acc. to DIN 6885. Please observe largest possible bore by keyway.
Keyway acc. to DIN 6885. Please observe largest possible bore by keyway.
Remarque importante concernant le téléchargement des modèles CAO
Pour pouvoir télécharger nos modèles CAO, vous devez d’abord connecter. Si vous n’avez pas encore créé de compte, inscrivez-vous en cliquant sur « Mon compte » (à droite de l’écran) et suivez les instructions.
Altri clienti hanno acquistato anche
