Roulement à rouleaux coniques à une rangée acier à roulement 23825-302004215
- Support of high radial and axial loads
- Suitable for medium speeds
Unità di vendita
31,15 CHF
Aggiunto al carrello
Denominazione
Cuscinetto conico
Versione 1
a una corona
Versione 2
con gabbia
Forma
C
Tipo di forma
Serie 320 (dimensioni ISO)
Tipo di prodotto
FAG
Materiale
Corpo base
acciaio per cuscinetti volventi
Materiale
Componente
acciaio
B2=Larghezza
15
D1=Diametro esterno
42
D=Diametro interno
20
KZZ.=Codice
32004-X
A
0,6
A1
0,6
B
15
B1
12
Capacità di carico
dinamica
N
24000
Capacità di carico
statica
N
28500
Velocità limite
1/min.
18200
~ CONFLICT MINERALS 3TG status
not yet identified
~ CONFLICT MINERALS procurement
DRC conflict-free
~ CP65 substance 2 cancer
soots, tars, and mineral oils
~ PFAS free?
not yet identified
~ REACH SVHC-free?
yes
~ RoHS conformity
yes, without exemption
~ TSCA 6(H) conformity
yes
Descrizione
Material
Inner ring, outer ring and rolling elements, bearing steel.
Cage, steel.
Cage, steel.
Version
Series 302
Series 303
Series 320 (ISO dimension)
Series 303
Series 320 (ISO dimension)
Note
Tapered roller bearings can accept high radial and axial loads. Axial loads are absorbed in only one direction. For axial counter support a second bearing mounted inverse is required. Suitable for medium speeds.
The bearings are separable. This means the bearing parts can be fitted independently of each other. The bearings are supplied without seals. They can be lubricated with grease or oil from the side.
The main dimensions of the tapered roller bearings conform to DIN ISO 355 and DIN 720. Dimensional and running tolerances correspond to tolerance class PN acc. to DIN 620. These tolerance classes are standard and are well suited for most applications.
The bearings are separable. This means the bearing parts can be fitted independently of each other. The bearings are supplied without seals. They can be lubricated with grease or oil from the side.
The main dimensions of the tapered roller bearings conform to DIN ISO 355 and DIN 720. Dimensional and running tolerances correspond to tolerance class PN acc. to DIN 620. These tolerance classes are standard and are well suited for most applications.
Temperature range
-30 °C to +120 °C.
On request
Other dimensions and versions.
Nota importante sul download dei modelli CAD
Per poter scaricare i nostri modelli CAD, occorre effettuare il login. Se non è stato ancora creato un account, si prega di registrarsi alla voce "Il mio account" (lato destro dello schermo) e di seguire le istruzioni.
D'autres clients ont également acheté
