Four-lip profile EPDM black 96523-018X20000
Unité de vente
82,36 CHF
hors TVA
Ajouté à votre panier
Désignation
Profilé à quatre rainures
Matériau
du corps de base
EPDM
Coloris
du corps de base
noir
B=Largeur
8,6
H=Hauteur
18
L=Longueur
20000
B1
10,7
H1
16
H2
2
H3
12
H4
4
Plage de serrage
en mm
8,6
~ CONFLICT MINERALS 3TG status
no intentional 3TG
~ CP65 substance 2 cancer
carbon-black extracts
~ PFAS free?
yes
~ REACH SVHC-free?
yes
~ RoHS conformity
yes, without exemption
~ TSCA 6(H) conformity
yes
Description
Product description
EPDM foam rubber sealing profiles for installation in sealing ducts, slots or U-profiles.
These four-lip profiles reliably seal and protect components from external influences.
These four-lip profiles reliably seal and protect components from external influences.
Material
EPDM foam rubber.
Version
black.
Note
Channel width must not be less than 8.6 mm.
H1= compressed dimension.
Type-tested according to UL 157 and UL 50E guidelines.
For optimal performance, the seal must be able to move freely and should ideally only be held in place by the two centre fins.
Observe tolerance specifications as per DIN ISO 3302-01.
H1= compressed dimension.
Type-tested according to UL 157 and UL 50E guidelines.
For optimal performance, the seal must be able to move freely and should ideally only be held in place by the two centre fins.
Observe tolerance specifications as per DIN ISO 3302-01.
Application
- Switchbox construction
- Machine and plant construction
- Automotive industry
- Construction and window fabrication
- Machine and plant construction
- Automotive industry
- Construction and window fabrication
Assembly
Quick, simple and smooth installation. When pressed in by hand, the four-lip profile wedges itself into a cavity or channel between two surfaces. The lateral fins prevent the profile from falling out.
Advantages
Wide tolerance compensation with applied pressure.
The seal works in both directions with positive and negative pressure.
No distortions in corners with small radii.
The seal works in both directions with positive and negative pressure.
No distortions in corners with small radii.
On request
Other lengths.
Drawing reference
1) Holding area
2) Uncompressed state
3) Compressed state
2) Uncompressed state
3) Compressed state
Remarque importante concernant le téléchargement des modèles CAO
Pour pouvoir télécharger nos modèles CAO, vous devez d’abord connecter. Si vous n’avez pas encore créé de compte, inscrivez-vous en cliquant sur « Mon compte » (à droite de l’écran) et suivez les instructions.
Altri clienti hanno acquistato anche
