Threaded insert Helicoil® stainless steel green 07645-0631
- Pour la réparation de filetages endommagés
- Pour raccords vissés haute résistance dans des matériaux à faible résistance au cisaillement
- Résistants aux facteurs de corrosion et aux sollicitations thermiques
- Haute qualité de surface
- Contenant différents inserts filetés
Unité de vente
1,48 CHF
hors TVA
Ajouté à votre panier
Designation
Threaded insert
Version 1
Helicoil®
Version 2
with spigot
DIN
DIN 8140
Main
material
stainless steel
Main
colour
green
G=Thread
M6
G=Threaded insert
M6
L=Length
6,9
W=Windungszahl
6,9
Core
drill Ø
6,3
D
min. - max.
7,6-7,85
Einbau
Mindest-Kernlochtiefe
14,1
Insert length
assembled
mm
9
Installation
Outer Ø
locating thread
7,3
Installation
min. thread depth
with chamfer
14,1
Installation
tapping hole
Ø
6,22-6,41
~ CONFLICT MINERALS 3TG status
no intentional 3TG
~ CP65 substance 2 cancer
nickel (metallic)
~ PFAS free?
yes
~ REACH SVHC-free?
yes
~ RoHS conformity
yes, without exemption
~ TSCA 6(H) conformity
yes
Description
Material
Stainless steel 1.4301.
Version
Green
Note
HeliCoil®plus threaded inserts are indispensable aids for every metalworking establishment and repair workshop.
Tapped holes that have been damaged, rusted solid or drilled too big can restored to their original size and condition within minutes.
Technically flawless and infinitely durable, resistant to corrosive influences and thermal stress. They therefore enable the repair and recovery of expensive products.
The high surface finish ensures optimum yield strength and higher tensile force for high-strength screws.
HeliCoil®plus threaded inserts are also ideally suited for motion threads in all light-alloys and castings.
T is the distance of the threaded insert from the separating face and is 0.25 to 0.5 of the thread pitch.
The control values of the non-installed threaded inserts are L and D.
Tapped holes that have been damaged, rusted solid or drilled too big can restored to their original size and condition within minutes.
Technically flawless and infinitely durable, resistant to corrosive influences and thermal stress. They therefore enable the repair and recovery of expensive products.
The high surface finish ensures optimum yield strength and higher tensile force for high-strength screws.
HeliCoil®plus threaded inserts are also ideally suited for motion threads in all light-alloys and castings.
T is the distance of the threaded insert from the separating face and is 0.25 to 0.5 of the thread pitch.
The control values of the non-installed threaded inserts are L and D.
On request
Other dimensions.
Drawing reference
1) Drive pin
2) Notch
3) Wire cross-section
2) Notch
3) Wire cross-section
Remarque importante concernant le téléchargement des modèles CAO
Pour pouvoir télécharger nos modèles CAO, vous devez d’abord connecter. Si vous n’avez pas encore créé de compte, inscrivez-vous en cliquant sur « Mon compte » (à droite de l’écran) et suivez les instructions.
Altri clienti hanno acquistato anche
