Centring clamping bolt 42214-1240
- For positioning basic modules on machine tables
- The machine spindle determines the position of the basic module.
- For locating in collets in order to position modules
- Contact faces ground
- Hardened
Unité de vente
551,97 CHF
hors TVA
Ajouté à votre panier
Désignation
Tenon de serrage et centrage
Dimensions
voir schéma
Taille
PAS DE 80 MM
~ CONFLICT MINERALS 3TG status
no intentional 3TG
~ CP65 substance 2 cancer
soots, tars, and mineral oils
~ PFAS free?
not yet identified
~ REACH SVHC-free?
yes
~ RoHS conformity
yes, without exemption
~ TSCA 6(H) conformity
yes
Description
Material
Steel.
Version
Hardened and black oxidised.
Contact faces ground.
Contact faces ground.
Note
The centring clamping bolts can be used to position basic modules on machine tables.
Centring clamping bolts can be clamped in collet holders. The position of the module is defined via the machine's spindle/control unit.
Can be used in Weldon, Whistle Notch and collet holders.
Repeat accuracy: < 0.021 mm
Positioning accuracy: < 0.049 mm
Shock absorber function to protect the machine spindle
Cushioning travel: 5.4 mm
Caution: Exceeding the cushioning travel of 5.4 mm may damage the machine.
Centring clamping bolts can be clamped in collet holders. The position of the module is defined via the machine's spindle/control unit.
Can be used in Weldon, Whistle Notch and collet holders.
Repeat accuracy: < 0.021 mm
Positioning accuracy: < 0.049 mm
Shock absorber function to protect the machine spindle
Cushioning travel: 5.4 mm
Caution: Exceeding the cushioning travel of 5.4 mm may damage the machine.
Remarque importante concernant le téléchargement des modèles CAO
Pour pouvoir télécharger nos modèles CAO, vous devez d’abord connecter. Si vous n’avez pas encore créé de compte, inscrivez-vous en cliquant sur « Mon compte » (à droite de l’écran) et suivez les instructions.
Other customers also bought
