Threaded insert self-locking stainless steel red 07646-0431
- Per la riparazione di filettature danneggiate
- Per collegamenti a vite capaci di sostenere forti carichi in materiali con scarsa resistenza al taglio
- Resistente contro gli effetti corrosivi e le sollecitazioni termiche
- Finitura superficiale di alta qualità
- Autobloccante
Unità di vendita
CHF0.34
Aggiunto al carrello
Denominazione
Inserto filettato
Versione 1
autobloccante
Versione 2
con puntale
Materiale
Corpo base
acciaio inox
Colore
Corpo base
rosso
G=Filettatura
M4
L=Lunghezza
3,5
-
5,7-6,8
Chiave in acciaio
1.4301
D
min. - max.
4,83-5,6
Lunghezza degli inserti
dopo il montaggio mm
6
Montaggio
Profondità minima del filetto
con smusso
8,45
Montaggio
Profondità minima del foro di base
9,15
Montaggio
punta da trapano Ø
4,2
Montaggio -
Ø esterno
filetto di alloggiamento
4,91
Montaggio -
Ø foro di base
per filetto
4,15-4,29
~ CONFLICT MINERALS 3TG status
no intentional 3TG
~ CP65 substance 2 cancer
nickel (metallic)
~ PFAS free?
yes
~ REACH SVHC-free?
yes
~ RoHS conformity
yes, without exemption
~ TSCA 6(H) conformity
yes
Descrizione
Material
Stainless steel 1.4301.
Version
Red
Note
Wire-bound threaded inserts are an indispensable tool for any metalworking business and repair shop.
Tapped holes that have been damaged, rusted solid or drilled too big can restored to their original size and condition within minutes.
Technically flawless and infinitely durable, resistant to corrosive influences and thermal stress. They therefore enable the repair and recovery of expensive products.
The high surface finish ensures optimum yield strength and higher tensile force for high-strength screws.
Self-locking threaded inserts are suitable for use in applications subject to shock, vibration or movement. A polygonal winding grips the flanks of the screw as it is screwed in.
T is the distance between the threaded insert and the dividing face and equals 0.25 to 0.5 times the thread pitch.
The number of windings W is the windings on the threaded insert before installation.
The reference dimensions for the non-installed threaded inserts are W and D
Tapped holes that have been damaged, rusted solid or drilled too big can restored to their original size and condition within minutes.
Technically flawless and infinitely durable, resistant to corrosive influences and thermal stress. They therefore enable the repair and recovery of expensive products.
The high surface finish ensures optimum yield strength and higher tensile force for high-strength screws.
Self-locking threaded inserts are suitable for use in applications subject to shock, vibration or movement. A polygonal winding grips the flanks of the screw as it is screwed in.
T is the distance between the threaded insert and the dividing face and equals 0.25 to 0.5 times the thread pitch.
The number of windings W is the windings on the threaded insert before installation.
The reference dimensions for the non-installed threaded inserts are W and D
Drawing reference
1) Drive pin
2) Notch
2) Notch
Nota importante sul download dei modelli CAD
Per poter scaricare i nostri modelli CAD, occorre effettuare il login. Se non è stato ancora creato un account, si prega di registrarsi alla voce "Il mio account" (lato destro dello schermo) e di seguire le istruzioni.
Other customers also bought
