5-Axis basic module UNILOCK QT steel oxidised 42215-12050601
- Zero point clamping system
- Ideal for clamping small workpieces
- Manual actuation
- 5-side machining without interfering edges
- Combinable with system size 80
Unità di vendita
747,40 CHF
Aggiunto al carrello
Denominazione
Modulo base 5 assi
Versione 1
UNILOCK
Forma
B
Tipo di forma
con spina antitorsione
Materiale
Corpo base
acciaio da bonifica
Superficie
corpo base
ossidato
D=Diametro
50
H=Altezza
50
Coppia
di serraggio
max. Nm
10
Dimensioni
Sistemske velikosti 50MM
Forza di retrazione
kN
10
H1
17,5
SW
4
~ CONFLICT MINERALS 3TG status
not yet identified
~ CP65 substance 2 cancer
soots, tars, and mineral oils
~ PFAS free?
not yet identified
~ REACH SVHC-free?
yes
~ RoHS conformity
yes, without exemption
~ TSCA 6(H) conformity
yes
Descrizione
Material
Carbon steel.
Version
Main body oxidised.
Contact faces hardened and ground.
Contact faces hardened and ground.
Note
UNILOCK 5-axis basic modules, system size 50, can be adapted directly to machine tables with grid holes or T-slots, as well as grid hole subplates. The basic module system size 50 can also be combined with system size 80. This enables smaller workpieces to be easily clamped using the module clamping system.
Fits onto UNILOCK zero-point clamping system with UNILOCK clamping bolt D=18 mm.
Can also be mounted directly onto commonly available zero-point clamping systems if a suitable clamping bolt is used.
The following clamping forces are possible with the UNILOCK clamping bolt in conjunction with M8, M10 fastening screws:
- Clamping force (M8) 15,000 N
- Clamping force (M10) 25,000 N
Clamping force with DIN EN ISO 4762 -12.9 cap screws.
Clamping bolts may only be clamped in conjunction with a mounted interchangeable unit in the clamping module.
Fits onto UNILOCK zero-point clamping system with UNILOCK clamping bolt D=18 mm.
Can also be mounted directly onto commonly available zero-point clamping systems if a suitable clamping bolt is used.
The following clamping forces are possible with the UNILOCK clamping bolt in conjunction with M8, M10 fastening screws:
- Clamping force (M8) 15,000 N
- Clamping force (M10) 25,000 N
Clamping force with DIN EN ISO 4762 -12.9 cap screws.
Clamping bolts may only be clamped in conjunction with a mounted interchangeable unit in the clamping module.
Nota importante sul download dei modelli CAD
Per poter scaricare i nostri modelli CAD, occorre effettuare il login. Se non è stato ancora creato un account, si prega di registrarsi alla voce "Il mio account" (lato destro dello schermo) e di seguire le istruzioni.
Altri clienti hanno acquistato anche
