Collier Collier double polypropylène vert 07842-1006011
- Per il fissaggio sicuro di tubazioni
- Con superficie interna scanalata
- Con precarico
- Consigliati per tubazioni
Unité de vente
CHF2.13
hors TVA
Ajouté à votre panier
Désignation
Collier
Modèle 1
Collier double
DIN
DIN 3015-3
Forme
A
Type de forme
Surface intérieure nervurée
Matériau
du corps de base
polypropylène
Coloris
du corps de base
vert
B=Largeur
30
H=Hauteur
27
L=Longueur
36
A
(mètres)
1
Couple de serrage
(polypropylène)
(Nm)
5
D
pour vis
M6
D1
(mm)
6
Force de maintien F du tube
(polypropylène)
(kN)
0,9
L1
20
S
min.
0,6
Taille
1
~ CONFLICT MINERALS 3TG status
no intentional 3TG
~ CP65 substance 2 cancer
soots, tars, and mineral oils
~ PFAS free?
yes
~ REACH SVHC-free?
yes
~ RoHS conformity
yes, without exemption
~ TSCA 6(H) conformity
yes
Description
Materiale
Polipropilene PP.
Versione
verde.
Nota
Collari doppi DIN 3015-3 con superficie interna scanalata, con precarico. Consigliati per il fissaggio sicuro di tubazioni parallele.
Da utilizzare preferibilmente come collari a punto fisso in cui il tubo viene bloccato tra le metà del collare. Lo spazio (S) tra le due metà del collare assicura il precarico corretto durante l'avvitamento.
La metà superiore e quella inferiore del collare sono identiche. Forniti in coppia.
Da utilizzare preferibilmente come collari a punto fisso in cui il tubo viene bloccato tra le metà del collare. Lo spazio (S) tra le due metà del collare assicura il precarico corretto durante l'avvitamento.
La metà superiore e quella inferiore del collare sono identiche. Forniti in coppia.
Dati tecnici
The specified screw tightening torques refer to installation with a cover plate and DIN EN ISO 4014/4017 hex head screws.
The axial pipe retaining force (according to DIN 3015, part 10) is an average value obtained from three tests at +23 °C with a DIN EN 10220 St37 steel pipe with a rolled surface, for which static friction is assumed. When the pipe clamp is loaded in the axial pipe axis with the specified pipe retaining force (F), the pipe will not slide in the pipe clamp.
The axial pipe retaining force (according to DIN 3015, part 10) is an average value obtained from three tests at +23 °C with a DIN EN 10220 St37 steel pipe with a rolled surface, for which static friction is assumed. When the pipe clamp is loaded in the axial pipe axis with the specified pipe retaining force (F), the pipe will not slide in the pipe clamp.
Temperature range
-30 °C to +90 °C
Assembly
The recommended clamp spacings (A) are guidelines and apply to static loads.
Pipe bends: When installing pipe bends, the clamps must be placed directly in front of and behind the bend.
Fittings: The first clamp should be mounted immediately after the fitting to isolate the fitting from vibrations.
Valves: If valves are integrated into the pipeline, a clamp should be fitted in front of and behind the valve.
Pipe bends: When installing pipe bends, the clamps must be placed directly in front of and behind the bend.
Fittings: The first clamp should be mounted immediately after the fitting to isolate the fitting from vibrations.
Valves: If valves are integrated into the pipeline, a clamp should be fitted in front of and behind the valve.
Remarque importante concernant le téléchargement des modèles CAO
Pour pouvoir télécharger nos modèles CAO, vous devez d’abord connecter. Si vous n’avez pas encore créé de compte, inscrivez-vous en cliquant sur « Mon compte » (à droite de l’écran) et suivez les instructions.
D'autres clients ont également acheté
