5-Axis basic module UNILOCK QT steel oxidised 42201-12500
- Sistema di serraggio a punto zero
- Azionamento manuale
- Adattabile alla tavola della macchina con sistema di griglia di forata o nel modello con scanalatura a T
- Precisione di ripetibilità molto elevata
- Lavorazione su 5 lati senza ingombri circostanti
Sales unit
1.220,14 CHF
plus sales tax
Added to your shopping cart
Designation
5-Axis basic module
Version 1
UNILOCK
Version 2
double clamp
Form
A
Form definition
without rotation lock
Product type
without foot
Main
material
QT steel
Surface finish
body
oxidised
D=diameter
80
H=Height
125
Holding
force
F kN
50
Retraction force
kN
15
SW
6
Size
SYSTEM SIZE 80MM
Tightening
torque
max. Nm
15
~ CONFLICT MINERALS 3TG status
not yet identified
~ CP65 substance 2 cancer
soots, tars, and mineral oils
~ PFAS free?
not yet identified
~ REACH SVHC-free?
yes
~ RoHS conformity
yes, without exemption
~ TSCA 6(H) conformity
yes
Description
Material
Carbon steel.
Version
Main body oxidised.
Contact faces hardened and ground.
Contact faces hardened and ground.
Note
The UNILOCK 5-axis basic module can be adapted directly to subplates with grid holes or T-slots or to tooling plates with a hole pitch of 40/50 mm system size M12. Suitable for UNILOCK zero point clamping system with UNILOCK clamping bolts. Can also be used on the conventional zero point clamping systems by mounting an appropriate adapter clamping bolt.
The basic module without base is particularly suitable for space-saving set-ups.
The following clamping forces are possible with the UNILOCK clamping bolt in conjunction with M10, M12, M16 fastening screws:
- Clamping force (M10) 35,000 N
- Clamping force (M12) 50,000 N
- Clamping force (M16) 75,000 N
Clamping force with DIN EN ISO 4762 -12.9 cap screws
Clamping bolts may only be clamped in conjunction with a mounted interchangeable unit in the clamping module.
The basic module without base is particularly suitable for space-saving set-ups.
The following clamping forces are possible with the UNILOCK clamping bolt in conjunction with M10, M12, M16 fastening screws:
- Clamping force (M10) 35,000 N
- Clamping force (M12) 50,000 N
- Clamping force (M16) 75,000 N
Clamping force with DIN EN ISO 4762 -12.9 cap screws
Clamping bolts may only be clamped in conjunction with a mounted interchangeable unit in the clamping module.
Important note on downloading CAD models
In order to download our CAD models, you must log in first. If you have not created an account yet, please register under "My Account" (right side of the screen) and follow the instructions.
D'autres clients ont également acheté
