Designation

Indexing plunger

Modèle 1

sans encoche d'arrêt

Modèle 2

Eco

Forme

RO

Form definition

with oval pull ring, without lock nut

Product type

standard

Main material

stainless steel

Surface finish body

bright

D1=Filetage

M12

D=diamètre de boulon

8

L=Longueur

67,2

Couple de serrage max. Nm

20

Course S

8

D4

11,8

F x 30°

2,3

Force du ressort finale F2 env. N

35

Force du ressort initiale F1 env. N

15

L1

26

L2

10

L3

23

Locknut

without locknut

SW1

12

Taille

3

~ CONFLICT MINERALS 3TG status

no intentional 3TG

~ CP65 substance 2 cancer

nickel (metallic)

~ PFAS free?

yes

~ REACH SVHC-free?

yes

~ RoHS conformity

yes, without exemption

~ TSCA 6(H) conformity

yes

Descrizione

Product description

Indexing plungers are used where any change in locking position due to lateral forces should be prevented. A new indexed position can be only be moved to after the pin has been manually retracted.
In addition to manual operation, the key ring also enables the connection of elements for remote operation, such as a tether cable.
Versions with an oval pull rings can also be fitted in deeper drilled-through holes.

The indexing plungers with indexing pins that have not been ground or hardened are a cost-effective alternative to existing indexing plungers. However, the precision offered is still sufficient for many applications. The tighter machining tolerances also make these products less sensitive to the alignment errors that can occur when aligning indexing plungers with the hole in the opposite component.

Material

Steel version:
Threaded sleeve free-cutting steel.
Indexing pin 1.4305.

Stainless steel version:
Threaded sleeve 1.4305.
Indexing pin 1.4305.

Key ring stainless steel 1.4310.

Version

Steel version:
Threaded sleeve blue passivated.
Indexing pin not hardened, bright.
Stainless steel version:
Threaded sleeve bright.
Indexing pin not hardened, bright.

Key ring bright.

Note

Pay attention to the max. tightening torque when assembling.

On request

Special versions.

Per poter scaricare i nostri modelli CAD, occorre effettuare il login. Se non è stato ancora creato un account, si prega di registrarsi alla voce "Il mio account" (lato destro dello schermo) e di seguire le istruzioni.